T-Rex 100X Super combo with charger and 2 lipos (KX022005)

Features
●Utilizes AFHDS 2.4Ghz frequency hopping technology for interference avoidance and stability.
●Radio transmitter consist of computer simulator output compatible with 3rd party R/C airplane and helicopter simulation software,
  and includes an adapter cable for computer simulator.
●Supports MODE 1/MODE 2/ MODE 3 controller modes.
●Design encompasses both agility and stability characteristics.
●Utilizes hobby grade micro servos and reinforced frame design for flight stability, crash sustainability, and longevity.
●NiMh/Lipo battery charging capability, capable of charging while flying.
●Convenient USB charge port, allowing PC USB port or any portable 5v USB power adapters to be used for charging the transmitter NiMH battery.
●Charging status and power capacity display.
●Blue backlit LCD display panel.
●5-in-1 electronics board consisting of receiver, ESC, headinglock gyro, servos, and mixing functions.

●To improve the flight stability and shorter learning curve, rotor head assembly features a new mounting method between rotor head and main shaft, and the surface area of flybar paddle has been increased. In addition to interchangeable stick mode on the transmitter, stick tension is also adjustable. Transmitter also feature gyro gain adjustment for simple tail sensitivity tuning.
●But the most unique feature is that T-Rex 100X can also be controlled through an iPhone, allowing pilot to experience a completely different flying method.
●Superior flight stability and quality assurance, for immediate indoor flying gratification, T-Rex 100X is the prime choice for any pilot!

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification:
●Length:202mm
●Height:82mm
●Main Rotor Diameter:192mm
●Tail Rotor Diameter:36mm
●Weight(w/o power system):27.8g
●Flying Weight:Approx 32g

Accessories:
● T-REX 100S Kits set x 1
● AT 100 Transmitter x 1
● 1.2V / 1600mAh Ni-MH Chargeable Battery x 4
● 3.7V / 150mAh Li-Polymer Battery x 2
● Simulator Cable x 1
● CD-ROM x 1
● CH100 Lipo Charger x 1
● USB Cable x 1
● Philips Screwdriver x 1